Høyytelses-kuttemølle SM 400 XL

Download Brochure Data sheet


Cutting mills are suitable for the grinding of soft, medium-hard, tough, elastic, fibrous, and heterogeneous mixes of products. The Cutting Mill SM 400 XL is ideally suited for pre-cutting of large sample pieces but, depending on the application,  may also achieve the required fineness in one step.

The high torque of the new 3 kW drive allows for an exceptionally effective preliminary size reduction of heterogeneous mixtures, such as waste or electronic components.

The cutting mill is used successfully for a great variety of materials. The sample is only moderately warmed up during the grinding process so that the mill is perfectly suitable for grinding temperature-sensitive materials.  Due to the large open surface of the 240 mm x 240 mm bottom sieve, it is possible to grind large sample quantities and to increase the throughput.

When operated with the optional cyclone-suction-combination, the SM 400 XL is also suitable for grinding light sample materials. In combination with the wide choice of bottom sieves, hoppers and collecting vessels, the mill can be easily adapted to varying application requirements.


avfall, bein, brunkull, dyremat, farmasøytiske produkter, folie, forpellets, gummi, harpiks
, hay, kabler, krydder, lær, materialblandinger, matvarer, papir, papp, PET forhåndsformer, plantematerialer, plast, plastleker, polymerer, sekundærbrensel, strå, tekstiler, tre, ... continue to application database


  • powerful size reduction thanks to 3 kW drive
  • optimum cutting effects
  • accepts large feed sizes up to 170 mm x 220 mm
  • quick and easy cleaning due to fold-back hopper, smooth surfaces
  • defined final fineness due to bottom sieves with aperture sizes from 1 - 20 mm


funksjon størrelsesreduksjon ved kutting
bruksområde biologi, engineering / environment / recycling, kjemi / plast, landbruk, matvarer, medisin / legemidler
matemateriale mykt, middels hardt, seigt, elastisk, fibrøs
nedmalingsprinsipp skjæring, kutting
matestørrelse* < 170 x 220 mm
sluttfinhet* 1 - 20 mm
volum prøvebeholder ~7.45L
turtall ved 50 Hz (60 Hz) 280 min-1
rotorens perifere hastighet 2.25 m/s
Rotordiameter 152 mm
rotortyper parallel section rotor
Traktetyper universal, long stock
material i maleverktøyet herdet stål, wolframkarbid
siktestørrelser trapezoid holes 1.00 / 2.00 mm
round holes 4.00 / 6.00 / 8.00 / 10.00 / 20.00 mm
Oppsamlingssystemer / innhold collecting receptacle 5 l
optional: cyclone-suction combination
drift trefasemotor
drivkraft 3 kW
Elektriske tilkoblingsdata ulike spenninger
Nettilkobling 3-fase
motorbrems -
kapslingstype IP 54
b x h x d lukket 695 x 1399 x 719 mm
nettovekt ~ 180 kg
Normer / standarer CE

Please note:
*avhengig av matemateriale og apparatkonfigurering /apparatinnstillinger


Size reduction in the Cutting Mill SM 400 XL takes place by cutting and shearing forces. The sample hits the rotor and is comminuted between the blades and the stationary cutting bars inserted in the housing.

Thanks to the wide range of accessories, the SM 400 XL can be easily adapted to different application requirements

Med forbehold om feil og tekniske endringer